Allied Telesis AT-WA1004G Network Router User Manual


 
AT-WA1004G User’s Guide
19
Physical Details
Front Panel
LEDs
Figure 2 Front Panel
Table 1 Front Panel LEDs
LED Status Description
Power ON
Power has been applied to the unit.
OFF
No power.
Status ON
An error has been detected.
OFF
The unit is operating in normal operation.
Blinking
This LED blinks during start up and
firmware upgrade.
LAN
Link/ACT ON
Corresponding LAN (hub) port is active.
OFF
No active connection on the
corresponding LAN (hub) port.
Flashing
Data is being transmitted or received via
the corresponding LAN (hub) port.
100 ON
Corresponding LAN (hub) port is using
100Base-T.
OFF
Corresponding LAN (hub) port connection
is using 10Base-T, or no active connection.