Filter
Top Products
2-3-3 Setup Procedures For ‘PPPoE xDSL’:
1
2
4
5
6
3
User Name (1): Please input user name assigned by your Internet service provider here.
Password (2): Please input the password assigned by your Internet service provider here.
Service Name (3): Please give a name to this Internet service. (Optional)
MTU (4): Please input the MTU value of your network connection here. (Use default value if you don’t know).
Connection Type (5): Please select the connection type of Internet connection you wish to use.
1. Continuous: Keep Internet connection alive, do not disconnect.
2. Connect on Demand: Only connects to Internet when there’s a connect attempt
3. Manual: Only connects to Internet when ‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is pressed.
Idle Time Out (6): Please input idle time out.
Specify the time to shutdown Internet connects after no internet activity is detected by minute. This
option is only available when connection type is ‘Connect on Demand’.
When all settings are finished, you’ll see the following message displayed on your web browser:
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this message:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
11