AmbiCom WL250N-AR Network Router User Manual


 
3-3-2 URL Blocking
If you want to prevent computers in local network from accessing certain website (like pornography, violence, or anything you
want to block), you can use this function to stop computers in local network from accessing the site you defined here.
This function is useful for parents and company managers.
Please click ‘Firewall’ menu on the left of web management interface, then click ‘URL Blocking’, and the following message will
be displayed on your web browser:
1
2
3 4
5
6 7 8
Enable URL Blocking (1): Check this box to enforce URL Blocking, uncheck it to disable URL Blocking.
URL/Keyword (2): Input the URL (host name or IP address of website, like http://www.blocked-site.com or
http://11.22.33.44), or the keyword which is contained in URL (like pornography, cartoon,
stock, or anything).
Add (3): Click ‘Add’ button to add the URL / keyword to the URL / Keyword filtering table.
Reset (4): Click ‘Reset’ to remove the value you inputted in URL/Keyword field.
Current URL Blocking Table (5): All existing URL/Keywords in filtering table will be listed here.
Delete Selected (6): If you want to delete a specific URL/Keyword entry, check the ‘select’ box of the MAC
address you want to delete, then click ‘Delete Selected’ button. (You can select more than
one MAC addresses).
Delete All (7): If you want to delete all URL/Keyword listed here, please click ‘Delete All’ button.
Reset (8): You can also click ‘Reset’ button to unselect all URL/Keywords.
After you finish all settings, please click ‘Apply’ button on the bottom of this page. After you click ‘Apply’, the following
message will be displayed on your web browser:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
62