AmbiCom WL250N-AR Network Router User Manual


 
2-5-7 Setup Procedures For ‘DNS’:
If you select Dynamic IPorPPPoEas Internet connection method, at least one DNS server’s IP address should be
assigned automatically. However, if you have preferred DNS server, or your service provider didn’t assign the IP address of
DNS server because of any reason, you can input the IP address of DNS server here.
1
2
DNS Address (1): Please input the IP address of DNS server provided by your service provider.
(Only numeric characters and dots are accepted)
Secondary DNS Address (2): Please input the IP address of another DNS server provided by your service provider, this is
optional. (Only numeric characters and dots are accepted)
When all settings are finished, you’ll see the following message displayed on your web browser:
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this message:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
30