Filter
Top Products
Customizing and Updating the PDU
66 80kW InfraStruXure PDU—Operation and Configuration
5. Enter your User Name and Password (both apc, for administrators only) and press the ENTER
key.
6. From the Control Console menu, select System, then Tools, then File Transfer, then
XMODEM.
7. The system will then prompt you with
Perform transfer with XMODEM -CRC? Type Yes
and press
ENTER.
8. The system will then prompt you to choose a transfer rate and to change your terminal settings
to match the transfer rate. Press
ENTER to set the PDU to accept the download.
9. In the terminal program, send the file using XMODEM protocol. Upon completion of the
transfer, the console will prompt you to restore the baud rate to normal.
The PDU network management interface will reboot when the download is complete.
Caution
Do not interrupt the download.