Filter
Top Products
2-15
Figure 29. DISPLAY DIMMER (HIGH) Setting Screen
LED DIMMER Setting — This screen, shown in Figure 30, lets you set a brightness
level of HIGH, LOW, or OFF for the front-panel light emitting diode (LED)
indicators. Use the SETUP pushbutton to advance to the LED DIMMER screen (not
shown). Once the display is shown, press the Up Arrow and Down Arrow
pushbuttons to set the brightness level of the LEDs.
Figure 30. DISPLAY DIMMER (HIGH) Setting Screen
GO TO BATTERY IF > XXXV Setting — This function allows you to set a high
voltage threshold for the unit, which forces it to switch to power from the internal
battery pack once the threshold has been reached. The settings range is from 134 to
142 volts, as shown in Figure 31.
Figure 31. GO TO BATTERY IF > XXXV Setting Screen
GO TO BATTERY IF < XXXV Setting — This screen, shown in Figure 32, allows
you to set a low voltage threshold for the unit, which will force it to switch to power
from the internal battery pack when the threshold is reached. Settings range from 92
to 100 volts.
Figure 32. GO TO BATTERY IF < XXXV Setting Screen
DISPLAY DIMMER:HIGH
PRESS ↑ ↓ TO CHANGE
LED DIMMER:HIGH
PRESS ↑ ↓ TO CHANGE
GOTO BAT IF >142V
PRESS ↑ ↓ TO CHANGE
GOTO BAT IF<94V
PRESS ↑ ↓ TO CHANGE