American Power Conversion S20BLK Power Supply User Manual


 
B-3
Reference Documents
The APC Network Management Card utility CD contains the following
documentation:
Network Management Card User’s Guide
PowerNet MIB Reference Guide
CD-ROM contents file (.\Contents\contents.htm)
Network Management Card Release Notes
Troubleshooting documents
Quick Configuration
This section covers NMC configuration, setup, and operating requirements.
Device IP Configuration Wizard
The APC Device IP Configuration Wizard configures the IP address, subnet mask,
and default gateway of Network Management Cards (NMCs), or APC network-
enabled devices (devices that contain an embedded Management Card). The Wizard
can be used in either of the following ways:
Through a direct connection from a serial port on your computer to a Management
Card or device to configure or reconfigure it.
Remotely over your TCP/IP network to discover and configure unconfigured
Management Cards or network-enabled devices located on the same network
segment as the computer that is running the Wizard.
Figure B2. Rear Panel I/O Communications Connectors
EthernetRS-232
USB
TEL/DVR/SAT/DSL
COAX IN/OUT