Filter
Top Products
B-2
NMC Major Features
The Network Management Card (NMC) has the following key features:
• Autosenses 10/100 MBS connection speeds
• Provides a data log accessible by FTP, SCP or a Web browser
• Supports remote monitoring services
• Provides UPS scheduling features
• Supports the APC PowerChute
®
Network Shutdown utility
• Provides an event log that is accessible by Telnet, FTP, or a Web browser
• Generates e-mail notifications for UPS or system events
• Limits SNMP traps and e-mail notifications based on the events’ level of severity
• Supports using the APC Device IP Configuration Wizard to configure other
network management cards over the network
Integrated Environmental Monitor
The S20BLK includes an integrated environmental monitor with a temperature
sensor that measures ambient room temperature in both Celsius and Fahrenheit.
Temperature values can be observed using the S20BLK unit’s VFD display, or on
your local workstation (PC), or via the serial port or embedded NMC.
To use the environmental monitor, simply connect the temperature cable (included
with the unit) to the round 8-pin mini-DIN connector labeled Probe, which is
located on the S20BLK unit’s rear panel, as shown in Figure B-1. Then proceed to
the Quick Configuration section in this manual, and the Environmental Monitoring
section in the Network Management Card User’s Guide for instructions on how to
setup and access the integrated environmental monitor.
Figure B-1. S20BLK Rear Panel Showing Probe Cable and Connector
Probe Connector