Filter
Top Products
Firmware Pages and Descriptions
52
TPI-PRO Total Presentation Interface - Pro Edition
Time & Date Setting Page
The Time & Date Settings page (FIG. 38) allows you to alter or set the time and date information on the
NetLinx Master. If either the time or date is modified on this page and then updated to the Master by
pressing the Set Time button, all devices communicating to that target Master are updated to reflect the
new information.
The elements of the Time & Date Setup page are described in the table below:
Panel Information Page Elements (Cont.)
Power Up Page Displays the first touch panel page assigned for display after the device is
powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String Displays the start-up string.
Wake Up String Displays the wake up string used after an activation from a timeout.
Sleep String Displays the sleep string used during the device’s sleep mode.
File System Displays the amount of Compact Flash memory available on the TPI-PRO.
RAM Displays the available RAM (or Extended Memory module) on the TPI-PRO.
FIG. 38 Time and Date Settings page (takes its information from the TPI-PRO device)
The only way to modify a TPI-PRO’s time, without altering the Master, is to use
NetLinx Code.
Time & Date Settings Page Elements
Back Returns you to the previously active touch panel page without saving changes.
(To save changes, use the Set Time button.)
Connection Status icon This visual display of the connection status allows the user to have a current
update of the TPI-PRO’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI-PRO has established a connection
with a currently secured target Master (requiring a username and password).
Time Date Refresh/Set This section provides you with two options:
• The Get Time/Date button retrieves the Time and Date information from the
Master.
• The Set Time/Date button sets the Master to retain and save any time or date
modifications made on the Time and Date Setup page.