Filter
Top Products
Programming
81
TPI-PRO Total Presentation Interface - Pro Edition
Programming Numbers
The following information provides the programming numbers for colors, fonts, and borders.
Colors can be used to set the colors on buttons, sliders, and pages. The lowest color number represents
the lightest color-specific display; the highest number represents the darkest display. For example,
0 represents light red, and 5 is dark red. The following table lists the RGB color values and names for
standard 88 colors.
RGB triplets and names for basic 88 colors
Page Commands (Cont.)
PPON
Activate a specific
popup page to
launch on either a
specified page or
the current page.
If the page name is empty, the current page is used (see example 2). If the popup page is
already On, do not re-draw it. This command works in the same way as the ’Show Popup’
command in TPDesign4.
Syntax:
"'PPON-<popup page name>;<page name>'"
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page on which the popup is
displayed.
Example:
SEND_COMMAND Panel,"'PPON-Popup1; Main'"
Activates the popup page ’Popup1’ on the Main page.
Example 2:
SEND_COMMAND Panel,"'PPON-Popup1'"
Activates the popup page ’Popup1’ on the current page.
RGB Values for all 88 Basic Colors
Index No. Name Red Green Blue
00 Very Light Red 255 0 0
01 Light Red 223 0 0
02 Red 191 0 0
03 Medium Red 159 0 0
04 Dark Red 127 0 0
05 Very Dark Red 95 0 0
06 Very Light Orange 255 128 0
07 Light Orange 223 112 0
08 Orange 191 96 0
09 Medium Orange 159 80 0
10 Dark Orange 127 64 0
11 Very Dark Orange 95 48 0
12 Very Light Yellow 255 255 0
13 Light Yellow 223 223 0
14 Yellow 191 191 0
15 Medium Yellow 159 159 0
16 Dark Yellow 127 127 0
17 Very Dark Yellow 95 95 0
18 Very Light Lime 128 255 0
19 Light Lime 112 223 0