Filter
Top Products
1) Number of Following Bytes (higher byte)
2) Number of Following Bytes (lower byte)
3) Measurement Mode
83
4) Printer Type
84
5) Current Language
(00h = English, 01h = French, 02h = German, 03h = Spanish, 04h = Chinese, 05h = Japanese)
6) LCD Contrast Value (0-255)
7) Date Format
(00h = MM/DD/YYYY, 01h = DD/MM/YYYY, 02h = YYYY/MM/DD)
8) RTC battery
85
(higher byte)
9) RTC battery (lower byte)
10) PC Board Revision
86
(higher byte)
11) PC Board Revision (lower byte)
12-25) Not Used
For Site Master VNA Modes:
26) Site Master VNA Mode Data Points (higher byte)
27) Site Master VNA Mode Data Points (lower byte)
28) VNA Start Frequency (Frequency in Hz) (highest byte)
29) VNA Start Frequency
30) VNA Start Frequency
31) VNA Start Frequency (lowest byte)
32) VNA Stop Frequency (Frequency in Hz) (highest byte)
33) VNA Stop Frequency
34) VNA Stop Frequency
35) VNA Stop Frequency (lowest byte)
36) VNA Scale Start (highest byte)
87
37) VNA Scale Start
38) VNA Scale Start
39) VNA Scale Start (lowest byte)
40) VNA Scale Stop (highest byte)
41) VNA Scale Stop
42) VNA Scale Stop
43) VNA Scale Stop (lowest byte)
44) VNA Frequency Marker 1 (higher byte)
88
45) VNA Frequency Marker 1(lower byte)
46) VNA Frequency Marker 2 (higher byte)
47) VNA Frequency Marker 2 (lower byte)
48) VNA Frequency Marker 3 (higher byte)
49) VNA Frequency Marker 3 (lower byte)
50) VNA Frequency Marker 4 (higher byte)
51) VNA Frequency Marker 4 (lower byte)
52) VNA Frequency Marker 5 (higher byte)
53) VNA Frequency Marker 5 (lower byte)
54) VNA Frequency Marker 6 (higher byte)
55) VNA Frequency Marker 6 (lower byte)
Site Master PM 37
83 Refer to Control Byte #3 “Select Measurement Mode” for valid measurement modes.
84 See Control Byte #30 for supported printers.
85 Value sent as Volts * 10. For example, 2.7V=27.
86 This value is for internal use only.
87 See “Set Site Master VNA Scale” Control Byte #4 for data format.
88 Marker Point=(#data points–1)*(marker freq – start freq) / ( stop freq – start freq)