1. dBm
194
(highest byte)
2. dBm
3. dBm
4. dBm (lowest byte)
For Power Meter Mode (Option 29):
57) Power Meter Mode (00h = Off, 01h = On)
58) Power Meter Unit (00h = dBm, 01h = Watts)
59) Start Frequency
195
(highest byte)
60) Start Frequency
61) Start Frequency
62) Start Frequency (lowest byte)
63) Stop Frequency (highest byte)
64) Stop Frequency
65) Stop Frequency
66) Stop Frequency (lowest byte)
67) Center Frequency (highest byte)
68) Center Frequency
69) Center Frequency
70) Center Frequency (lowest byte)
71) Frequency Span (highest byte)
72) Frequency Span
73) Frequency Span
74) Frequency Span (lowest byte)
75) Power Offset Status (00h = Off, 01h = On)
76) Power Offset
196
(highest byte)
77) Power Offset
78) Power Offset
79) Power Offset (lowest byte)
80) Power Relative Status (00h = Off, 01h = On)
81) Power Relative Value
197
(highest byte)
82) Power Relative Value
83) Power Relative Value
84) Power Relative Value (lowest byte)
85) RMS Averaging Level (00h = Off, 01h = Low, 02h = Medium, 03h = High)
86) Power Zero Status (00h = Off, 01h = On)
87) External Reference Status (00h = Off, 01h = On)
88) External Reference Frequency
198
(highest byte)
89) External Reference Frequency
90) External Reference Frequency
91) External Reference Frequency (lowest byte)
92) Signal Standard
199
(higher byte)
93) Signal Standard (lower byte)
94) Channel Selection
200
(higher byte)
58 Site Master PM
194 Value sent as ( value in dBm * 1000 ) + 270,000
195 Scaled by Frequency Scale Factor (bytes 96-97)
196 Value sent as ( value in dB * 1000 ), valid values are 0 to 60 dB
197 Value sent as ( value in dBm * 1000 )
198 Scaled by Frequency Scale Factor (bytes 96-97)
199 Index into Standard List (use control byte #89 to retrieve the ASCII string name). “No Standard” sent as FFFEh
200 “No Channel” is sent as FFFEh