Anritsu S331D Network Router User Manual


 
56) Site Master VNA Single Limit (highest byte)
89
57) Site Master VNA Single Limit
58) Site Master VNA Single Limit
59) Site Master VNA Single Limit (lowest byte)
60) VNA Multiple Limit Segment # (1)
61) VNA Multiple Limit Segment Status (0h = Off, 01h = On )
62) VNA Multiple Limit Segment Start X (highest byte)
90
63) VNA Multiple Limit Segment Start X
64) VNA Multiple Limit Segment Start X
65) VNA Multiple Limit Segment Start X (lowest byte)
66) VNA Multiple Limit Segment Start Y (higher byte)
67) VNA Multiple Limit Segment Start Y (lower byte)
68) VNA Multiple Limit Segment End X (highest byte)
69) VNA Multiple Limit Segment End X
70) VNA Multiple Limit Segment End X
71) VNA Multiple Limit Segment End X (lowest byte)
72) VNA Multiple Limit Segment End Y (higher byte)
73) VNA Multiple Limit Segment End Y (lower byte)
74-129) Repeat bytes 60 – 73 for segments2-5
130) Start Distance (highest byte)
91
131) Start Distance
132) Start Distance
133) Start Distance (lowest byte)
134) Stop Distance (highest byte)
135) Stop Distance
136) Stop Distance
137) Stop Distance (lowest byte)
138) Distance Marker 1 (higher byte)
92
139) Distance Marker 1 (lower byte)
140) Distance Marker 2 (higher byte)
141) Distance Marker 2 (lower byte)
142) Distance Marker 3 (higher byte)
143) Distance Marker 3 (lower byte)
144) Distance Marker 4 (higher byte)
145) Distance Marker 4 (lower byte)
146) Distance Marker 5 (higher byte)
147) Distance Marker 5 (lower byte)
148) Distance Marker 6 (higher byte)
149) Distance Marker 6 (lower byte)
150) Relative Propagation Velocity (highest byte)
93
151) Relative Propagation Velocity
152) Relative Propagation Velocity
153) Relative Propagation Velocity (lowest byte)
154) Cable Loss (highest byte)
94
155) Cable Loss
38 Site Master PM
89 See Control Byte #6, “Set Site Master VNA Single Limit” for data format.
90 See Control Byte #112, “Set Site Master VNA Segmented Limit Lines” for data format.
91 Distance data uses units 1/100,000m or 1/100,000 ft
92 Marker Point=(#data points–1)*(marker dist – start dist)/(stop dist – start dist )
93 Relative Propagation Velocity uses units 1/100,000.
94 Cable loss uses units 1/100,000 dB/m or 1/100,000 dB/ft.