Anritsu S331D Network Router User Manual


 
137) T1 1
st
User Defined Loop Up (lower byte)
138) T1 2
nd
User Defined Loop Up (higher byte)
139) T1 2
nd
User Defined Loop Up (lower byte)
140) T1 1
st
User Defined Loop Down (higher byte)
141) T1 1
st
User Defined Loop Down (lower byte)
142) T1 2
nd
User Defined Loop Down (higher byte)
143) T1 2
nd
User Defined Loop Down (lower byte)
144) T1 User Defined Pattern (highest byte)
145) T1 User Defined Pattern
146) T1 User Defined Pattern
147) T1 User Defined Pattern (lowest Byte)
148) T1 Bit Error Insert Value (1-1000) (higher byte)
149) T1 Bit Error Insert Value (lower byte)
150) T1 Frame Error Insert Value (1-1000) (higher byte)
151) T1 Frame Error Insert Value (lower byte)
152) T1 BPV Error Insert Value (1-1000) (higher byte)
153) T1 BPV Error Insert Value (lower byte)
154) T1 Graph Resolution
139
155) T1 Measurement Duration
140
156) T1 Voltage Measurement Scale (00h = Vpp, 01h = dBdsx)
157) T1 Auto Framing (00h = Fixed Framing, 01h = Auto Framing)
158 – 240) Not Used
For E1 Mode (Option 50):
26) E1 Receive Input (00h: Terminate, 01h: Bridged, 02h: Monitor)
27) E1 Framing Mode (03h: PCM30, 04h: PCM30CRC, 05h: PCM31, 06h: PCM31CRC)
28) E1 Line Coding (02h: AMI, 03h: HDB3)
29) E1 Clock Source (00h: External, 01h: Internal)
30) E1 Tx Level
31) E1 Error Insert Type (00h: Frame Error, 01h: BPV, 02h: Bit Errors, 04h: RAI, 05h: AIS)
32) E1 Loop Code
33) E1 CRC Method
34) E1 Loop Type
35) E1 Pattern (highest byte)
36) E1 Pattern (lowest byte) (01h: PRBS-9, 02h: PRBS-11, 03h: PRBS-15, 04h: PRBS-20(O.151), 05h:
PRBS-20(O.153), 06h: PRBS-23, 07h: QRSS, 08h: 1 in 8, 09h: 2 in 8, 0Ah: 3 in 8, 0Bh: All Ones, 0Ch: All
Zeros, 0Dh: T1-DALY, 0Eh: User Defined)
37) E1 Pattern Invert (00h: Non-Inverted, 01h: Inverted)
38) E1 Display Type (00h: Histogram, 01h: Raw Data)
39) E1 Impedance (01h: 75W, 02h: 120W)
40 - 55) First User Defined Loop Code Down (16 bytes)
56 - 71) Second User Defined Loop Code Down (16 bytes)
72 - 87) First User Defined Loop Code Up (16 bytes)
88 - 103) Second User Defined Loop Code Up (16 bytes)
104 - 135) User Defined Pattern (32 bytes)
136) E1 1
st
User Defined Loop Up (highest byte)
137) E1 1
st
User Defined Loop Up (lowest byte)
138) E1 2
nd
User Defined Loop Up (highest byte)
139) E1 2
nd
User Defined Loop Up (lowest byte)
140) E1 1
st
User Defined Loop Down (highest byte)
Site Master PM 47
139 Graph Resolution: 00h: Auto, 01h: 1 sec, 02h: 15 sec, 03h: 30 sec, 04h 45 sec, 05h 1 min, 06h: 15 min, 07h: 30 min,
08h: 45 min, 09h: 60 min
140 Measurement Duration: 00h: Manual, 01h: 3 min, 02h: 15 min, 03h: 30 min, 04h: 1 hr, 05h: 3 hrs, 06h: 6 hrs, 07h: 12
hrs, 08h: 1 day, 09h: 2 days