Filter
Top Products
Installing the PC Compatibility Card hardware
There are several steps to installing your PC Compatibility Card hardware:
m opening the computer
m disconnecting the CD-ROM audio cable
m opening the expansion card cover and chassis
m inserting the PC Compatibility Card
m connecting the Sound Out cable
m connecting the CD In cable to the card
m replacing the chassis and expansion card cover
m connecting the CD In cable to the CD-ROM drive
m replacing the computer cover
Opening the computer
1Shut down the computer and disconnect all cables from the computer, except for the
power cord.
Leave the computer plugged in for now, to ground it and protect its
components from static electricity damage.
2If the security bar is installed, remove it by removing the screw under the front panel and
pressing the center of the bar.
First, remove the screw.
Then press the security bar near its
center to release it from the computer.
101
Reinstalling the PC Compatibility Card in Your Power Macintosh 7300 Computer