Filter
Top Products
Installing protocols for use with Network Driver Interface Specification (NDIS) 2.0
Installing NetBEUI and IPX/SPX in Windows 95
This section describes how to set up the NetBEUI and IPX/SPX protocols for
use with an NDIS driver in Windows 95. If you are using ODI, refer to this
topic in “Installing Protocols for Use With Open Data-Link Interface (ODI)”
earlier in this appendix.
1In Windows 95, click Start, choose Settings, and then choose Control Panel.
2Double-click the Network icon to open it.
3Select Add; then select Adapter.
4Select Have Disk.
5Insert the floppy disk containing the NDIS 2.0 driver. Verify the drive; then click OK.
6You see the message “PC Card Network Driver (NDIS2).” Click OK.
The following network items will be automatically installed:
m Client for Microsoft Networks
m Client for NetWare Networks
m PC Card Network Driver (NDIS2)
m IPX/SPX-compatible Protocol
m NetBEUI
7Choose any custom settings you need (for example, enable file sharing).
8Select Identification. Fill in the boxes labeled “Computer Name,” “Workgroups,” and
“Computer Description.” Then click OK.
9Insert the
Windows 95
CD when prompted to do so.
Windows 95 will install all the necessary network components.
10 Go to “Running the Network Protocol Setup (SETNET) Utility” near the end of this
appendix and follow the instructions there. Then return to this section.
140
Appendix D