Filter
Top Products
The PC Compatibility Card supports network drivers that conform to Novell’s
Open Data-Link Interface (ODI) and Microsoft’s Network Driver Interface
Specification (NDIS) version 2.0. This appendix describes how to install and
configure a variety of network protocol software and client software.
Use this appendix as a supplement to the documentation that came with your
network software. If your configuration still doesn’t work after following the
instructions in this appendix, contact the manufacturer of your network
software.
Throughout the process of installing network software, remember the four
following items:
m You must run SETNET every time you add or remove a network protocol,
install or upgrade network software, or change anything in the network
control panel. If you do not run SETNET, you will experience network
problems.
m When you install a NetWare client, install it under the NWCLIENT
directory. Otherwise, the SETNET program will not work with ODI and
your networking software will not work correctly.
m Use the MACODI.COM and MACNDIS.DOS driver found on the
PC
Compatibility Card–PC Utilities CD when installing network protocols for
the PC Compatibility Card. Do not use any of the drivers that ship with
Windows 95.
m When using the MACODI.COM driver, use the latest LSL driver (2.21 or
later), available from the Novell Web site at http://www.novell.com.
133
Appendix D
Installing Network Client Software