Filter
Top Products
7Click the button labeled “Disable bi-directional support for this printer.” Then click OK.
If this button is not available, click OK; then go on to the next step.
8In the Properties window, click Port Settings.
The Configure LPT Port dialog box appears.
9Make sure the checkbox labeled “Check port state before printing” is unchecked. Then
click OK.
If you are using a non-Post Script printer, go to step 13. If you are using a
PostScript printer, follow these steps:
10 In the Properties window, click the PostScript tab.
11 Click Advanced.
The Advanced PostScript Options dialog box appears.
12 Make sure the checkboxes labeled “Send CTRL+D before Job” and “Send CTRL+D after
Job” are unchecked. Then click OK.
40
Chapter 3