Filter
Top Products
135
Installing Network Client Software
3 In the window that appears, select “Restart the computer in MS-DOS mode.”
4 Insert the
NetWare Client Kit Disk 1
into the disk drive.
5 To switch to the disk, type the following:
A: <return>
6 To start the installation process, type the following:
INSTALL <return>
7 Follow the instructions on screen for steps 1–3. Then select step 4 and press Return.
A list of network interface controller (NIC) drivers appears.
8Eject the NetWare floppy disk by pressing
x
-E.
9 Insert the
PC Compatibility Card–PC Utilities
CD and press Return.
TheMACODI.COM driver is located in the \Apple directory on the PC
Compatibility Card–PC Utilities CD.
10 From the list of choices, select “PC Compatibility Ethernet Adapter” and press Return.
11 When installation is complete, return to Windows 95 by typing the following:
EXIT <return>
12 When Windows 95 restarts, you see an error message. Press Return.
The error message is
C:\windows\system\vmm32\vnetbios.VXD does not exist
13 Click Start, choose Settings from the menu that appears, and then select Control Panel.
14 Double-click the Network icon to open it.
15 Select Add in the Network control panel.
16 Select the Adapter Component in the Network Component list and then click Add.
17 Under Manufacturers, select “(detected net drivers).”