Filter
Top Products
Installing NetBEUI and IPX/SPX in Windows 95
NetBEUI and IPX/SPX are automatically installed as part of the standard
NetWare client software version 1.02 installation. Refer to the section
“Installing NetWare Client Software Version 1.02 for Windows 95,” earlier in
this appendix.
Installing Client 32 for Windows 95
This section describes how to install Client 32 for Windows 95. Client 32 is
installed on top of the existing NetWare version 1.02.
1Install NetWare Client version 1.02 for Windows 95.
To i n s t a ll NetWare version 1.02 for Windows 95, follow the steps in the
section “Installing NetWare Client Software Version 1.02 for Windows 95,”
earlier in this appendix.
2 Follow the onscreen instructions.
3When prompted for a driver, select “Existing ODI Driver.”
4When installation is complete, restart Windows 95.
Installing TCP/IP in Windows 95
This section describes how to install the TCP/IP protocol for use with an ODI
driver in Windows 95. If you are using NDIS 2.0, refer to this topic in
“Installing Protocols for Use With Network Driver Interface Specification
(NDIS) 2.0,” later in this appendix.
1Install the NetWare client software.
For more information, see the appropriate section on installing NetWare
client software earlier in this appendix.
2In Windows 95, click the Start button, choose Settings, and then choose Control Panel.
3Double-click the Network icon in the Control Panel.
4Click Add in the Network Configuration dialog box.
5Select Adapter Component from the Network Component list and click Add.
138
Appendix D