Filter
Top Products
98 - PowerBook G4 (15-inch FW 800_1.5/1.33GHz) Take Apart
Logic Board
7. When replacing the logic board, guide the port side into the port openings on the
bottom case.
Connect the two connectors that go under the logic board on the left side of the
board.
Note: Use care not to catch cables under the board as it is lowered into place.
8. Attach the screws in the order shown.
Note: If a right ambient light sensor will be installed, install the upper right screw (9)
during that procedure.
9. Reassemble and test all ports, components and functions of the computer.
Note: After installing new thermal material, if you must briefly re-separate the logic board
from the heatsink, it is OK to retain the same, new thermal material, as long as they are
not handled excessively.
922-6473
#1-3
6.9 mm
922-6472
#4-8
4.5 mm
922-6475
#9
9.5 mm