Filter
Top Products
76 - PowerBook G4 (15-inch FW 800_1.5/1.33GHz) Take Apart
Ambient Light Sensor Boards
2. To remove the right ambient light sensor, remove the two screws, then lift up on the
ambient light sensor board to disconnect it from the logic board (the connector is on
the bottom of the board).
Note: The sensor assembly consists of two pieces: the sensor board and a lens
cover.
Replacement Note: Assemble the replacement sensor board and lens cover before
installation.
922-6475
9.5 mm
922-6090
3.2 mm