Filter
Top Products
12 -
PowerBook G4 (15-inch FW 800_1.5/1.33GHz) Adjustments
Display Rear Housing Adjustment
13. Remove the backing on the foam strips.
14. Because the diffuser is square, you may orient it in any way as long as it aligns with
the pen lines on the housing. Place it straight against one line, and allow the foam
strips to adhere to the housing and match up to the other pen lines.
Important:
To avoid creating pressure points on the LCD panel, the adhesive foam
must not ride up onto the plastic of the logo at any point, even slightly. Check this by
running your finger along the foam. If it goes over the logo plastic, reapply the
diffuser.