Filter
Top Products
134 - PowerBook G4 (15-inch FW 800_1.5/1.33GHz) Take Apart
Display Hook Assembly
Procedure
Caution: Handle the display assembly by the edges only. Avoid pressure on the back of
the display (the white area of the LCD panel).
1. At the top edge of the display assembly, remove the four silver-colored screws that
secure the display hook assembly to the display bezel.
Caution: The screws are quite delicate. To avoid stripping the screws, make sure
that the screwdriver fits correctly and that steady pressure is applied when removing
and reinstalling the screws.
Note: Depending on the date of manufacture, the hook assembly may have a
somewhat different appearance, as shown below.
2. Replacement Note: To install the replacement hook assembly, press down on the
pivot point of the hook to make sure the hook assembly is balanced and stays flat
against the display bezel as it is secured by the screws.
Install the replacement hook assembly, and reassemble and test the computer.