Filter
Top Products
INSTALLATION 2.7
INSTALLING THE MULTIRAM C CARD
The following step—by—step instructions will allow you to easily install and
test the MultiRam C Card in your Apple //c.
You should carefully read over all of the instructions before proceeding with
installation. Although no technical skills are required to install the card,
you must open the case of your Apple to do the installation. Checkmate
Technology can not assume responsibility for damages to the Nc case or //c
circuitry that are caused by improper installation.
If your //c is under warranty, opening the //c case will void the Apple
warranty. If your Apple is under its original 90 day warranty or If you have
purchased an extended warranty from Apple Computer, Inc., you should have an
authorized Apple dealer install your MultiRam C Card. Most Apple dealers will
continue to honor your Apple’s warranty period if they perform the installation.
Check with your favorite Apple dealer for more information.
If you have any doubts regarding the installation, please have a qualified
technician install the card.
Materials Required
To install the MultiRam C Card into your Apple //c, you should gather together
the following materials before starting:
Medium size Phillips screwdriver
Small flat blade screwdriver or kitchen butter knife
Small metal kitchen spoon
Soft cloth or mat
Blank disk
Disk copy program
MultiRam disk packed with the card
Preparation
Before opening the case of your Apple to install the card, you need to prepare a
work area, a backup Utility disk and the Apple itself.
The area where you will install your Apple should be large enough to lie the
Apple down flat and there should also be room for your monitor. A power outlet
for both the external Apple power supply and the monitor should be available for
later testing purposes.
Clear a space on the work area large enough to place both the Apple and your
monitor. Spread a large, soft cloth over the area. You will disassemble the
Apple on this cloth.