Filter
Top Products
V
Preface
HOW TO USE THIS MANUAL
This manual is divided into four parts.
Part 1
GETTING STARTED, should be read first by everyone. Chapter 1 summarizes
MultiRam C’s features and minimum hardware requirements. Chapter 2 gives
step—by—step instructions for installing MultiRam C and adding memory to the
card. Chapter 2 is required reading for those who intend to install their own
RAM. Chapter 3 covers testing and troubleshooting procedures.
Part 2
USING THE MULTIRAM C CARD, shows how to use the software included with your
MultiRam C Card. Chapter 4 explains how to use MultiRam C’s large memory with
AppleWorks. Chapter 5 shows how to use MultiRam C as a fast RAM disk drive for
DOS 3.3 and ProDOS. Chapter 6 covers software and hardware compatibility
questions.
Part 3
PROGRAMING THE MULTIRAM C CARD, should be read if you intend to develop
software using MultiRam C’s memory. If you don’t intend to program MultiRam C
yourself, you say skip this section. Chapter 7 details programming techniques
required to use the standard //c 64K auxiliary memory bank. Chapter 8 shows how
to use all of MultiRam C’s 64K auxiliary memory banks.
Part 4
ThE MULTIRAM C SERVICE GUIDE, should be read by everyone. Chapter 9 describes
the MultiRam C warranty. Chapter 10 tells how you can get service if you have a
problem and explains RAM replacement and software update policies.
This manual assumes you know how to operate your Apple //c. If you are a new
Apple //c owner or if any terms or procedures used in this manual are unfamiliar
to you, please refer to your Apple //c owner’s manual for help.