Filter
Top Products
21
6. Functions
6.1 Wall Projection
The LOCPRO 35 must stand on a solid, flat
surface and should be completely disconnected
from the mains before it is moved.
See also notes in chapter 4.
Optimum wall projection of approx. 2.3 m (7 ft) width is
reached at a distance of 4 m (12 ft), measured from the
back of the unit to the projection wall.
6.1.1 Frame line
After closing the film channel (see chapter 5.7), adjust the
frame line, if necessary.
Note: Frame line adjustment is only possible during
still projection.
Functions
“film“- key
master control knob
1) Master control knob is in ”0” position (no film transport).
2) The frame line (horizontal line in the projected picture)
can be shifted out of the visible picture by briefly
depressing the ”film” key ➪ photo.
Each keystroke shifts the frame line by 1/4 frame.