ARRI LOCPRO 35 Projector User Manual


 
52
Power consumption: .................. 230 V, 3.5 A / 115 V, 7 A
Computer interface: .................. RS 232, 8 Bit, no parity, one start and one
stop bit
Digital display: ......................... Frame counter, 5 digits
Projection speed
Set up Mode (selectable by “Mode” key),
unit configuration,
filmcore diam. selection,
film type selection
Frameline adjustment: ............... 1/4 image per keystroke
Auto-Stop: ................................ film run stops automatically 2 m (6 ft) before
end of film
Auto winding recognition: ......... no switchover necessary when changing
winding direction A or B
Focussing:................................. manually
Projection height adjustment: ..... max. 15°
Accessories: .............................. mains cable, maintenance tool kit,
Video camera (optional)
IR-remote control (optional)
Covering cap (optional)
Shipping and projection case (option)
ASU (Audio Sync Unit),
Timecode cable for DAT recorder (optional),
Image format masks (optional)
1/3” CCD-Color IMAGER
Signal system: ........................... PAL NTSC
Pixels: ....................................... 752 (H) x 582 (V) 768 (H) x 494 (V)
Scanning area: ......................... 6,0 mm x 4,96 mm 6,0 mmx 4,96 mm
Synchronization: ....................... internal internal
Scanning system: ...................... 2:1 interlaced 2:1 interlaced
S/N ratio: ................................ 46 dB 48 dB
H/V resolution: ......................... 460 (TV) lines 470 (TV) lines
Video output: ............................ FBAS or Y/C FBAS or Y/C
Video masking: ......................... freely adjustable freely adjustable
Technical Data