35
Mode 4: Select film type and film core diameter (Bobby
size) – Press ”Mode” key three times
Display left: More config.
Display right: Y
• Press ”Reset” Key 1 x
Display left: Perfo Corr.
Display right: Memory 1-5
Select requested memory (film type) by repeatedly
pressing ”Reset” Key (higher value) or ”Film” Key
(lower value).
Factory-programmed film types:
Color film pos. perforation (acetate) ........... memory 1
Color film neg. perforation (acetate) ...........memory 2
Color film pos. perforation (polyester).........memory 3
b/w neg. perforation (polyester) ................memory 4
• Press ”Mode” Key
Display film core (bobby size) e.g. 50 mm (2“)
Select requested film core diam. by repeatedly pressing
”Reset” Key (larger diam.) or ”Film” Key (smaller diam.)
Selectable diameters are: 50 (2“), 75 (3“) and 100mm
(4“).
• Exit menu by repeatedly pressing ”Mode” Key (Display
in normal view)
Functions
End Setup
End Setup
higher value
lower value
higher value
lower value
ON/OFF
LAMP
RESET
FILM
OPEN
ADJUST
CLOSE
MODE
ON/OFF
LAMP
RESET
FILM
OPEN
ADJUST
CLOSE
MODE
ON/OFF
LAMP
RESET
FILM
OPEN
ADJUST
CLOSE
MODE
BOBBY SIZE
50 MM
PERFO CORR 1
MORE CONFIG Y