ARRI LOCPRO 35 Projector User Manual


 
6
Make sure the LOCPRO 35 stands securely and do not
block the air vents of the HTI lamp cooling fan on the
bottom side! See photo page 9.
Keep all inflammable material away from the air vents
of the HTI lamp cooling fan.
see photo page 9.
For sufficient air cooling, it is essential that the air
supply and escape vents on the sides are not blocked.
see photo page 9.
Disconnect the unit from the mains before starting
maintenance or service!
The unit is to be opened only by a qualified electrical
specialist. If fuses need to be replaced, ensure that
only the values indicated are used. See chapter 7.4.
Repairs should be made by authorized service tech-
nicians only!
Use only original replacement parts and accessories!
Follow the maintenance instructions in this user manual.
Follow the shipping and storing instructions.
Important Notes
In humid weather please take the usual and customary
safety measures.
In case of poor picture steadiness check the film guide for
possible contamination, such as e.g. splicing residues
or emulsion deposits.Clean if necessary! (see chapter 7.1)
Optical surfaces should only be cleaned with an optic
cleaning brush. To remove sticky emulsion deposits, please
use an optic tissue, moistened with pure alcohol.
Do not use solvents for cleaning!
Do not loosen the paint-secured screws!
Product Identification
Please always refer to the model type and unit serial number
when ordering spare parts or requesting information.
Explanation of the Symbols
photo refers to objects identified by pictures, photos
or graphs.
Safety