Filter
Top Products
Configuring RMON Parameters
Page 7-3
Configuring
RMON
Parameters
▲ Important! A knowledge of RMON is strongly
recommended to configure these parameters.
To view and configure RMON parameters via the IntraSwitch
5212’s Local Management Interface:
1
Access the IntraSwitch 5212’s Local Manage-
ment Interface.
∆ Note: See Chapter 4, “Setting Up For Man-
agement” for instructions on how to connect
to the Local Management Interface.
2
Type c from the Main Menu.
The “Enter Password” prompt appears.
3
Type your password at the prompt, then press
Return.
4
Type m to open the RMON Parameters menu.
The following menu appears:
Figure 7-1 RMON Parameters Menu
From this menu you can access three submenus:
❏ "RMON History Group" on page 7-4
❏ "RMON Alarm Group" on page 7-9
❏ "RMON Event Group" on page 7-15
book Page 3 Monday, March 2, 1998 4:27 PM