Filter
Top Products
Installation
Page 2-14
❏ Stop Bits: 1
❏ Flow Control: None
If configuring with a Macintosh computer,
please call Asanté Technical support for proper
DIN 8 – DB-9 cable.
3
The IntraSwitch 5212’s Local Management Inter-
face Main Menu appears on the terminal screen,
as shown in Figure 2-9.
Figure 2-9 IntraSwitch Local Management Interface Main Menu
4
Type c to open the Configuration Menu.
The “Enter Password” prompt appears.
5
Type your password at the prompt.
▲ Important! The default password is
Asante. The password is case-sensitive.
For information on changing the password,
see "Setting Console Password" on page 5-34.
6
Type i to open the TCP/IP Parameter Menu.
7
Type i to select the option “Set IP Address.”
8
Type the valid IP address to be assigned to the
IntraSwitch 5212 at the prompt.
This address becomes the new factory default
setting.
book Page 14 Monday, March 2, 1998 4:27 PM