Filter
Top Products
Installation Overview
Page 2-3
Installation
Overview
The table below describes the steps needed to install the
IntraSwitch 5212. The steps that are optional are labeled
“optional”; the steps that are required are labeled “required.”
The sections that follow explain each step in detail.
To install the IntraSwitch 5212:
Table 2-1 Installation Overview
Step Action
1 (required) Open the box and check the contents.
See “"Package Contents" on page 1-7 for a
complete list of the items included with your
IntraSwitch 5212.
2 (required)
Install the IntraSwitch 5212 in an equipment rack
or prepare it for desktop placement.
See "Rack Mounting/Desktop Placement" on page
2-4.
3 (optional)
Install an Asanté MII expansion module. See
"Installing an Asanté MII Module" on page 2-6.
4 (required)
Plug in and check the power connection.
See "Connecting Power" on page 2-8.
5 (required)
Connect the IntraSwitch 5212 to the network.
See "Connecting to the Network" on page 2-9.
6 (optional)
Configure the IntraSwitch 5212 for management
capabilities.
See "Setting up for Management" on page 2-12.
book Page 3 Monday, March 2, 1998 4:27 PM