Filter
Top Products
Configuring Port Parameters
Page 5-25
∆ Note: If you are using full duplex mode
with a Macintosh, be sure to use an
Asanté driver with full duplex support.
Improper duplex negotiation may result
in very slow performance.
Configuring Auto-Negotiation
Auto-negotiation is an optional feature of the Fast Ethernet
standard that allows two devices on a common segment to
communicate their capabilities, allowing the devices to
determine their highest common speed and best
communication parameters.
Options Negotiated
❏ Ethernet type (100Base-TX Fast Ethernet or
10Base-T Ethernet)
❏ Duplex mode (half or full)
To configure the 10/100TX port or an installed 10/100
Asanté MII module for auto-negotiation:
▲ Important! Only the 10/100TX port and 10/
100 Asanté MII port are capable of auto-negoti-
ation.
1
Open the Port Parameter Menu by typing p
on the Configuration Menu.
2
Select the 10/100TX port or 10/100 Asanté
MII port to be configured for full duplex
mode by typing l and entering the port’s
number.
∆ Note: The 10/100TX port is port num-
ber 13, the Asanté MII port is port num-
ber 14.
book Page 25 Monday, March 2, 1998 4:27 PM