Filter
Top Products
Console Management
Page 5-20
∆ Note: If there is an entry in the trap
receiver table of an IP address for any
component connected to the 5212
IntraSwitch, other traps will be gener-
ated. These include traps for cold starts
(when power is cycled off and on or the
plug is unplugged and reconnected), link
ups (when a component is plugged into a
port or a link is established), and link
downs (when you unplug a component
from a port or lose a link).
Adding a Trap Receiver Entry
Trap receivers are the management stations designated to
receive traps from the IntraSwitch 5212 when they occur.
∆ Note: The maximum number of trap receiv-
ers that can be added is four.
To add a trap receiver entry:
1
Open the SNMP Parameter Menu by typing n
in the Configuration Menu.
2
Type a to add an SNMP trap receiver entry.
3
Type the IP address of the network manage-
ment station you want to receive traps.
To cancel a selected option, press ctrl-c at
the command prompt.
4
Press Return.
The trap receiver entry is added.
Deleting a Trap Receiver Entry
To delete a trap receiver entry:
1
Open the SNMP Parameter Menu by typing n
on the Configuration Menu.
book Page 20 Monday, March 2, 1998 4:27 PM