Filter
Top Products
Setting Telnet Idle Time Out
Page 5-33
Setting Telnet Idle Time Out
This option sets the Telnet idle time-out period.
If a Telnet connection to the IntraSwitch 5212 remains idle for
the number of specified time-out minutes, the remote Telnet
connection to the IntraSwitch 5212 is automatically disabled.
To set the Telnet Idle Time Out period:
1
Type t from the Configuration Menu.
The following two lines appear at the bottom of
the screen.
Figure 5-13 Set TelNet Idle Time Out command line
The current idle time is displayed in minutes.
2
Enter the number of minutes for the time-out
period at the prompt.
∆ Note: The default, recommended time-out
period is 20 minutes.
To exit this option without making any
changes to the current idle time-out
period, press ctrl-c.
3
Press Return.
The IntraSwitch 5212’s Telnet idle time-out set-
ting is configured.
▲ Important! Only one Telnet or HTTP
Management session should be active at a
time. Please close sessions when finished.
book Page 33 Monday, March 2, 1998 4:27 PM