Filter
Top Products
Console Management
Page 5-8
3
From this menu you can access configuration sub-
menus by typing the command letter of the corre-
sponding menu option (e.g., type a for the Configure
System Administration Information Menu).
Table 5-2 provides a brief overview of each menu
item.
Table 5-2 Configuration Menu Items
Menu Item Description
Config System
Administration Information
Displays and allows you to change the name,
location, and contact information for the
IntraSwitch 5212.
See "Configuring System Administration
Information" on page 5-10.
Config TCP/IP Parameters
Displays and allows you to change the
information needed to access the IntraSwitch
5212 over the network (in-band management).
See "Configuring TCP/IP Parameters" on page
5-12.
Config Bootstrap Parameters Displays and allows you to change the
parameters used for downloading a new
version of software for the IntraSwitch 5212.
See "Configuring Bootstrap Parameters" on
page 5-14.
Config SNMP Parameters Displays and allows you to change the
IntraSwitch 5212’s SNMP (Simple Network
Management Protocol) parameters; such as,
read/write settings, trap authentication, and
trap receivers.
See "Configuring SNMP Parameters" on page
5-17.
Config Port Parameters
Allows you to manually configure each of the
IntraSwitch 5212’s ports for speed, connection,
link mode, and auto-negotiation.
For more information, see "Configuring Port
Parameters" on page 5-21.
Config RMON Parameters
Displays and allows you to change the
IntraSwitch 5212’s RMON parameters.
See "Configuring RMON Parameters" on page
5-26.
book Page 8 Monday, March 2, 1998 4:27 PM