Filter
Top Products
Viewing the Current Operating Information
Page 6-3
Table 6-1 General Information Menu Parameters
Setting Description
Switch Name The name of the IntraSwitch 5212.
Switch Location The location of where the IntraSwitch
5212 is physically located.
Switch Contact The name of the person responsible for
the IntraSwitch 5212.
ID/MAC Address The IntraSwitch 5212’s hardware
address.
IP Address The IntraSwitch 5212’s IP (Internet
Protocol) address.
Subnet Mask The address of the subnet to which the
IntraSwitch 5212 belongs.
Default Router The IP address of the IntraSwitch 5212’s
default gateway router.
Boot Load Mode The origin of the device boot image file
(a software file residing on hardware
required by the IntraSwitch 5212 to
operate on the network).
Local — indicates the IntraSwitch 5212
is set to load the image file from its
internal flash memory (default setting).
Remote — indicates the IntraSwitch
5212 is set to download the image file
from a remote boot server on the
network.
book Page 3 Monday, March 2, 1998 4:27 PM