Filter
Top Products
MIB II (RFC 1213)
Page B-3
Event Group
The Event group controls the generation and notification of
events from the switch.
Each entry in the eventTable describes the event’s parameters
that can be triggered. The switch generates an event when an
associated condition is present in the MIB. The event can
trigger a related function in the MIB.
Each eventEntry can specify that, when an event occurs, a log
entry and an SNMP trap message is created for the event. The
community for the SNMP trap message is contained in the
associated eventCommunity object. The condition that triggers
the event determines the enterprise and specific trap fields of
the trap. If the eventTable is triggered by a condition specified
elsewhere, the enterprise and specific trap fields must be
specifies for traps generated for that condition.
Data related to the control of the generation and notification of
events from the selected device.
MIB II
(RFC 1213)
The IntraSwitch 5212 supports the following MIB II groups:
System Group
The System group collects information about the switch and
the network.
This group contains the following: a description of the system,
the name of the organization or enterprise, the system up time,
the contact person for the system, the system's name and
location, and services for the system.
Interface Group
The Interface group collects information about the interface for
the system.
This group contains the following: fields that describe the
network interfaces and list the system's physical address,
description, type, size, bandwidth, operational status, uptime at
last change, out queue length, MIB definitions, administrative
status of the system, and various input and output data.
book Page 3 Monday, March 2, 1998 4:27 PM