Filter
Top Products
Configuring SNMP Parameters
Page 5-17
Configuring SNMP Parameters
This menu controls the IntraSwitch 5212’s SNMP (Simple
Network Management Protocol) parameters.
With these parameters, you can configure the IntraSwitch
5212’s read and write community strings, set the IntraSwitch
5212 to generate authentication traps, and determine which
management stations on your network can receive traps.
To access the SNMP Parameter Menu, type n from the
Configuration Menu. The following menu appears.
Figure 5-7 SNMP Parameter Menu
Current Settings
Table 5-6 explains each setting on the SNMP Parameter
Menu.
For information on using the menu, see:
❏ "Changing Community Strings" on page 5-19
❏ "Enabling Traps" on page 5-19
❏ "Adding a Trap Receiver Entry" on page 5-20
❏ "Deleting a Trap Receiver Entry" on page 5-20
Current Settings
book Page 17 Monday, March 2, 1998 4:27 PM