Filter
Top Products
Installation
Page 2-8
Connecting
Power
To connect power to the IntraSwitch 5212:
1
Plug one end of the supplied power cord into
the power connector on the back of the
IntraSwitch 5212.
Figure 2-5 Connecting the power cord to the IntraSwitch 5212
2
Plug the other end of the power cord into a
grounded AC outlet.
∆ Note: For more information about power
and environmental requirements, see
Appendix C, “Technical Specifications.”
3
Turn the power switch to the “on” position.
Make sure the IntraSwitch 5212’s front panel
LEDs blink and the POWER LED lights and
remains on.
▲ Important! If the power does not come
on, refer to Appendix A, “Troubleshooting.”
4
Turn the IntraSwitch 5212’s power off.
The IntraSwitch 5212 is ready to be connected
to the network.
Power Switch
Power Cord
MII (Port 14)
Redundant Power Supply
book Page 8 Monday, March 2, 1998 4:27 PM