Filter
Top Products
IntraSwitch Components
Page 1-3
IntraSwitch
Components
10/100TX Port
The auto-negotiating 10/100TX port allows for the connection
of a 10Base-T or a 100Base-T (Fast Ethernet) device. See
"10/100TX Port" on page 2-9 for more information.
10Base-T Ports
The 12 fixed 10Base-T ports allow for the connection of 10Base-
T Ethernet devices. See "10Base-T Ports" on page 2-9 for more
information.
Management Connections
The Console port can be used for out-of-band management of
the IntraSwitch. See "Out-of-Band Management" on page 4-4 for
information.
Asanté MII Expansion Slot
The Asanté Media Independent Interface (Asanté MII)
expansion slot allows for the addition of various access
modules, including: 10/100TX, 100Base-FX, or 10Base-FL. See
"Asanté MII Ports" on page 2-10 for more information.
Redundant Power Supply Connector
The redundant power connection can be used to connect to an
Asanté external RPSU 6000 redundant power supply (sold
separately). The RPSU 6000 provides the IntraSwitch with
power in the event that the switch’s main power connection
fails. Refer to the RPSU 6000’s Installation Guide for more
information or to Appendix C in this manual for part number
information.
Power Switch
The power switch turns the IntraSwitch 5212 on or off. See
"Connecting Power" on page 2-8 for instructions on powering
on the IntraSwitch.
Power Supply Connector
The 110/220-volt power supply connector provides the
IntraSwitch 5212’s power connection. See Appendix C,
"Technical Specifications" for more information.
book Page 3 Monday, March 2, 1998 4:27 PM