Filter
Top Products
KH2508 / KH2516 User Manual
12
Stacking and Rack Mounting
The KH2508 / KH2516 can be stacked on a desktop or rack mounted in 1U of
rack space. The procedures for each method are described in the following
sections.
Note: 1. Allow at least 5.1 cm on each side for adequate ventilation and
12.7 cm at the rear for power cord and cable clearance.
2. The standard rack mounting kit does not include screws or cage nuts.
If you need additional screws or cage nuts, contact your rack dealer.
Stacking
The KH2508 / KH2516 can be placed on any level surface that can safely
support its weight and the weight of the attached cables. Ensure that the surface
is clean and free of materials that can block the exhaust vents or otherwise
interfere with normal operation of the switch. A foot pad set is included with
the unit. Peel the protective backing off of the foot pads, and then affix them to
the bottom panel of the KH2508 / KH2516 near the corners, as shown in the
diagram below.