Filter
Top Products
KH2508 / KH2516 User Manual
82
Restoring Original Factory Default Settings
You can restore the original factory default settings for the KH2508 / KH2516
Cat 5 KVM Switch. The original password for the default administrator
account is restored; all administrator and user accounts are removed from the
system. Only the station name and date and time are retained. This procedure
requires the use of a jumper cap.
1. Turn off the KH2508 / KH2516 and unplug the power cord.
2. Remove the cover of the KH2508 / KH2516.
3. Place a jumper cap over pins 1-2 of the J11 jumper on the mainboard.
4. Plug in the power cord and turn on the KH2508 / KH2516. The following
directions appear on the console screen:
USERNAME AND PASSWORD INFORMATION AND PORT/USER
INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE
SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN
RESTART.
5. Turn off the KH2508 / KH2516 and unplug the power cord.
6. Remove the jumper cap from pins 1-2 of the J11 jumper.
7. Replace the cover on the KH2508 / KH2516. Plug in the power cord and
turn on the KH2508 / KH2516.
8. You should now use the default username and password to login to the OSD.