Filter
Top Products
Chapter 4. OSD Operation
51
Upgrade Failed
If a firmware upgrade to an adapter cable fails, the port information field
displays an Upgrade failed! message.
To recover from a failed adapter cable firmware upgrade:
1. Disconnect the adapter cable from its computer.
2. Move the F/W UPGRADE switch on the adapter cable to the Recover
position.
3. Reconnect the adapter cable to the computer.
4. Perform an adapter cable firmware upgrade on the port.
5. After the adapter cable firmware has successfully upgraded, move the F/W
UPGRADE switch on the adapter cable back to the Normal position.
6. Disconnect and reconnect the adapter cable from its computer, again.
7. Click Cancel to exit the Upgrade Adapter Cable Firmware dialog box and
return to the System dialog box.