Filter
Top Products
Chapter 4. OSD Operation
41
The configuration page settings are explained in the following table:
Setting Function
OSD Hotkey Selects which Hotkey controls the OSD function: [Scroll Lock]
[Scroll Lock], or [Ctrl] [Ctrl]. Since the Ctrl key combination may
conflict with programs running on the computers, the default is the
Scroll Lock combination.
ID Display Selects how the Port ID is displayed: the Port Number alone
(PORT NUMBER); the Port Name alone (PORT NAME); or the
Port Number plus the Port Name (PORT NUMBER + PORT
NAME). The default is PORT NUMBER + PORT NAME.
ID Duration Determines how long a Port ID displays on the monitor after a port
change has taken place. You can choose an amount from 0–255
seconds; a setting of 0 constantly displays the port ID. The default
is 5 seconds.
Scan Target Selects which computers will be accessed under Auto Scan Mode
(see Auto Scanning, page 39). Choices are: ALL - All the Ports
which have been set Accessible (see Port Access, page 45);
POWERED ON - Only those Ports which have been set
Accessible and are Powered On; QUICK VIEW - Only those Ports
which have been set Accessible and have been selected as Quick
View Ports (see Quick View Ports, page 30); QUICK VIEW +
POWERED ON - Only those Ports which have been set
Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
Scan Duration Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see Auto
Scanning, page 39). Key in a value from 1–255 seconds. The
default is 10 seconds; a setting of 0 disables the Scan function.
Screen Blanker If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes. The default setting of 0 disables this function.
Logout Timeout If there is no user input for the amount of time set with this
function, the user is automatically logged out. A login is necessary
before the KH2508 / KH2516 can be accessed again. Enter a
value from 0–180 minutes. The default is 30 minutes.
0 disables the function.
Beeper When set to ON, the beeper sounds whenever a port is changed,
when activating the Auto Scan function (see Auto Scanning,
page 39), or an invalid entry is made in an OSD menu. The
default is ON.
Change Password Allows the current user to change his own account password.
After clicking the Change Password button, a dialog box appears.
Enter the old password. Then, enter a new password and confirm
it by entering it again. Press OK to save changes, or press Cancel
to discard changes.