Audiovox 600E Printer User Manual


 
NovaJet PRO 600e User's Guide
2-14 Getting Started
Color calibration aligns the inkjets of the cartridges to each other. Misalignment can result from
small tolerance variations in cartridges during manufacturing and from cartridge alignment in the
printer. Color test patterns let you check the horizontal and vertical alignment values and adjust
them for the best printing results. A loupe is provided in the accessory box to help you check the
prints.
You should perform Color Deadband Compensation before perfoming Color Calibration. Perform
Color Deadband Calibration and Color Calibration each time a cartridge is replaced with a different
cartridge. If you remove and reinstall the same cartridge, only Color Calibration needs to be
performed.
To perform color deadband compensation
1 With paper loaded, press Utility/Calibration Menu/Color DB Test.
The test patterns print as shown below.
2 For each color, examine the vertical lines and select the straightest lines. Note the
compensation number at the bottom of the lines you selected.
3 Existing compensation values are printed in the lower right corner of the test pattern.
If any of these differ from the values you selected, enter new compensation values by
pressing the button for the color deadband you want to change. Then use the Next
and Previous option buttons to scroll to the desired compensation.
To perform color calibration
1 With paper loaded, press Utility/Color Calibration Menu/Calib Print Test.
The test patterns print as shown below.
Black
Color
Horizontal head-to-head test pattern