Audiovox 600E Printer User Manual


 
Printer maintenance and storage 4-3
NovaJet PRO 600e User's Guide
MAINTENANCE
AND STORAGE
2 Disconnect the cartridge tube from the carriage by pushing down on the disconnect
button and removing the quick connect fitting.
3 Remove the cartridge from its carriage stall by gently pulling the top edge toward
you, then lifting it out of the stall. Do not remove the cartridge tube from the
cartridge. Leaving the tube in the cartridge maintains negative pressure and
prevents leakage. Do not touch the flex contact area of the cartridge.
Push down on
disconnect button
to remove fitting
Do not remove
cartridge tube
from cartridge
4 Wipe any ink from the quick connect fitting at the end of the tube using a lint-free
cloth.
5 Insert the cartridge into the cartridge garage. Make sure the cartridge cap lip snaps
and locks into the cartridge garage locking tab. This will assure a good seal.
Insert Cartridg
e
into Cartridge
Garage
Make sure cartridge cap lip
snaps and locks into cartridge
garage locking tab
Cartridge
cap lip
6 Store the cartridge garage upright to prevent leaks.