Filter
Top Products
NovaJet PRO 600e User's Guide
E-2 Serial communications and cabling
Setting serial communications parameters
If your software or hardware platform only has serial communication capability, check the
manuals provided with your system for the required communication parameters prior to setting
the RS-422/232 options on the printer.
Setting the baud rate
Baud rate is the data transmission rate (in bits per second) between your computer and the
printer. The Serial Communicaitons menu lets you select from the following baud rates: 9600,
19200, 38400
➪➪
➪➪
➪ To set the baud rate
1 Select Setup/Serial Communications Menu/Baud Rate.
2 Choose the desired rate.
3 Press OK.
Setting the parity bit
The Serial Communications menu lets you select from the following parity options:
Even, Odd, None
➪➪
➪➪
➪ To set the parity bit
1 Select Setup/Serial Communications Menu/Parity Bit.
2 Choose the desired option.
3 Press OK.
Setting the data bit
The Serial Communications menu lets you set the data bit to 7 or 8.
➪➪
➪➪
➪ To set the data bit
1 Select Setup/Serial Communications Menu/Data Bit.
2 Choose the desired option.
3 Press OK.