Filter
Top Products
38 AMX Switch Series Installer/User Guide
Figure 3.4: Configure Screen
3. Select Quick Switch.
4. To save changes, click Apply. To exit the OSCAR interface, click Cancel or X.
NOTE: Quick switch hotkeys only work if there is an existing connection and the OSCAR interface is
not activated.
Setting a local switch hotkey
A local switch hotkey allows you to force a connection to the local server by typing Alt+2.
Figure 3.5: Configure Screen
To enable the local switch hotkey:
1. Press
Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Console tab, then
click the down arrow button to display the Configure screen.
3. Select Loca
l Switch.
4. To save changes, click Apply. To exit the OSCAR interface, click Cancel or X.
NOTE: The local switch hotkey will not force a connection if two local servers are attached to the user station or
if the OSCAR interface is open when the hotkey is entered.
AMX.book Page 38 Thursday, June 12, 2008 4:14 PM